allied telesyn www.alliedtelesyn.com datasheet | network interface cards (nic) at-2701fx/ftx & at-2746fx fast ethernet fiber network interface cards (nic) a t-2701fx/aa-xxx 100mpbs fast ethernet fiber network interface card (nic) a t-2701ftx/aa-xxx 100mpbs fast ether net dual f iber and copper nic a t -2746fx/aa-xxx 100mpbs fast ethernet 10mbps dual port fiber nic choice & fle xibility allied telesyns at-2701fx/ftx and at-2746fx are the answers for those fiber adapters that support wake on lan (wol) for either pci 2.1 or pci 2.2 systems b ut not both. allied telesyns nics support wol through the pci 2.2 b us and suppor t pci 2.1 w ol via external cab les. resistant to signal degr adation, snooping, and interference, the at-2701fx/ftx and at- 2746fx are ideal solutions for networks requiring protection from electrical interference and hackers.the small footprintogether with the lo w-prof ile option of the a t -2701fx/ftx make these products a perfect choice for pcs equipped with small desktop solutions. allied telesyns card assistant software allied telesyns at-2701fx/ftx and at-2746fx feature a full-line of card assistant software: ? a t-setup reduces window driver installation to a mouse click.this windows program guides users through driver installation, updates, and problem corrections. ? at-stat is an advanced windows application that repor ts netw or k conditions and performance such as hardware resources, netw or k statistics, and configuration. ? the vlan protocol driver allows network administr ators to configure their vlan network fabric at the pc instead of the switch, enabling transparent movement of systems between switches. ? tcp/ip checksum off-loading impro v es cpu use b y verifying tcp/ip traffic checksums at the adapter rather than at the host processor, improving overall system performance for slower pcs. ? p acket prioritization enables windows applications with class of ser vice capabilities to prioritize out-bound packet streams to these nics, a useful feature for video streaming and voip where interruptions are unacceptable.the a t-2701fx/ftxs and at-2746fxs onboard managed boot agent (mba) provides a wide set of industry-standard boot protocols, including pxe, netware ncp/ipx, ibms rpl, tr aditional dhcp , and bootp, supporting both bbs (bios boot specif ication) and non-bbs compliant pcs. it also includes an extensive set of utilities f or boot r om configuration, as well as access to pre-os and network boot image files. offering a wide range of connector choicest , sc , mt -rj, or vf-45hese cards meet the requirements of most fiber installations. key features ? pci 2.2 compliant ? wake on lan (wol) ? secur ed transmissions ? advanced installation utility ? advanced diagnostics ? pxe 2.0 support with bootrom pre-installed ? tcp/ip checksum off-loading ? vlan support - link aggregation - load-balancing and auto fail-o v er ? t raffic prioritization ? low-profile option ? 1mb fifo ? driv er suppor t f or popular operating systems including sun solaris ? available with sc, st, mt-rj, or vf-45 connections ? compliant with the trade agreement act ? lifetime warranty products shown above (left to right): at-2701fx/sc, AT-2701FTX/sc, and at-2746fx/st/st .com .com .com 4 .com u datasheet
usa headquarters | 19800 north creek parkway | suite 200 | bothell | wa 98011 | usa | t: +1 800 424 4284 | f: +1 425 481 3895 european headquarters | via motta 24 | 6830 chiasso | switzerland | t: +41 91 69769.00 | f: +41 91 69769.11 asia-pacific headquar ters | 11 tai seng link | singapore | 534182 | t: +65 6383 3832 | f: +65 6383 3830 www.alliedtelesyn.com ?2005 allied telesyn inc. all rights reserved. information in this document is subject to change without notice. all company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000031 rev.i at-2701fx/ftx & at-2746fx | network interface cards (nic) status indicators a t-2701fx 2 leds to indicate: link/act on for link blink for activity fdx on for full-duplex off for half-duplex AT-2701FTX/2746fx 2 leds to indicate: 10mbps on for link blink for activity green for full-duplex yellow for half-duplex 100mbps on for link blink for activity green for full-duplex yellow for half-duplex pc bus interface bus interface pci 2.2 compliant bus width 32-bit data t ransfer mode pci 2.2 bus mastering power management interface acpi driver support netware 4.2, 5, and 6 windo ws 95, 98, me, xp , nt4, 2000, and 2003 linux 2.2, 2.4 100mbps fiber interface connectors st, sc, mt-rj, or vf-45 f iber type multi-mode fiber output p o w er minimum: -19db typical: -16.8dbm maximum: -14db receive sens . maximum: -31db utp interface connector shielded rj-45, mdi 10fl connectors st, sc fiber type multi-mode fiber output power minimum: -18.8db typical: -15.8dbm maximum: -13.8db receive sens. maximum: -7.6db selection guide 100fx 10/100tx 10fl a t-2701fx x - - AT-2701FTX x x - at-2746fx x - x power characteristics 1a at 5v environmental characteristics operating t emp. 0 to 50? operating humidity: 5% to 80% non-condensing storage humidity: 5% to 95% non-condensing ph ysical characteristics at-2701fx/ftx depth 17.5cm (6.9") height 6.5cm (2.6") at-2746fx depth 17.7cm (7") height 8.3cm (3.3") standar ds and compliance ieee 802.3u 100fx ieee 802.3u 100tx ieee 802.3j 10fl 802.1q/p electrical/mechanical appr o vals fcc/en55022 class b ultuv en55024 ce ordering information at-2701fx/aa-xxx 100mpbs fast ethernet fiber network interface card (nic) AT-2701FTX/aa-xxx 100mpbs fast ethernet dual fiber and copper nic at-2746fx/aa-xxx 100mpbs fast ethernet 10mbps dual port fiber nic where aa = st, sc, mt-rj, or vf-45 (for at-2701fx/ftx) sc/sc or st/sc or st/st (for at-2746fx) where xxx = 001 for single unit 020 for 20-unit pack 901 for single unit, compliant with t rade agreements act 920 for 20-unit pack, compliant with trade agreements act .com .com .com 4 .com u datasheet
|
